|
|
|
Who's Online
There currently are 6031 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I've been in the electronic business for a long time. I used to buy Sam's Photofact for my needs which intailed having to go to the store and paying about $20 for a package of 3 different units so I was forced to buy more than I needed just to get one.
Owner manual is just at your keyboard and the information is almost instantansouly and the cost is very reasonable. Easy to print out if needed or simply read off of the screen. The larger the screen the better for obvious reasons.
;
Very good manual, at a very good price. Received in a timely manner
;
Only thу cover has poor quality, internal material has excellent quality - exactly what I needed
Thanks!
 ;
Had everything I needed. Onyly took a few hours after paid for by PayPal. The copy was very readable.
;
Hi
First, thank you very much for the fast delivery.
I'm really satisfied with your manual. I could find everything, I needed.
I appreciate your service.
Regards from Germany PB
BJC-5000
Part 5: Maintenance
7.Machine Temperature Error
<Cause> The thermistor is abnormal. <Suspected Parts> Thermistor <Corrective Action> Replace the logic board.
8.Waste Ink-Full Warning/Error
<Corrective Action>
Visual check of the waste ink absorber
<Cause> The waste ink absorbers� estimated waste ink amount
has reached 95% (Warning) or 100% (Error). <Suspected Parts> Waste ink absorbers, logic board
� Check to see how much ink the waste ink absorber has absorbed. (Check the rate of ink penetration for the entire waste ink absorber as a guideline to determine the waste ink counter setting value.) No 1. Reset the waste ink amount in the EEPROM. 2. Replace the logic board. 0% (clear), 25%, 50% or 75% (See Part 3 �3.4 Service Mode.)
Waste ink absorbed is 75 % or more of the limit ? Yes
Replace the waste ink absorber. END
� Clear the total of the waste ink amount saved in the EEPROM.
5-21
|
|
|
> |
|
