|
Who's Online
There currently are 5847 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Great PDF easy to read good info needed for replacment of belts and assembly and specs.
;
complete and unabridged very good quality
easy to download.
recieved in two days.
;
Awesome manual. Complete diagrams of all board assemblies as well as how to get to each part of the t.v. down to the individual screws and their locations. Get it.
;
perfect copy, im very satisfied, i was need the diagram over the powersupply and
the copy was very sharp
;
This is exactly the service manual I needed.
Complete with all schematics, partslists, PCB layouts and alignment instructions.
This manual covers both the T-4970 en T-488F Onkyo tuner.
5-3. INK LOW WARNING RESET BY BUTTON OPERATION Ink low warning This printer detects the remaining ink level by counting the number of ejected ink dots in the same way as the BJC-80/80v. When the setting of the ink low warning is enabled, and the remaining ink gets low, the beeper sounds twice, and the ERROR LED blinks. Pressing the cartridge replacement button will sound the beeper and move the carriage to the center, and the ERROR LED indicates the ink cartridge for which the remaining ink is low as shown below.
Blinks once: when the remaining ink of the BCI-10 / BCI-11Bk / BCI-12Bk is little
Blinks twice: when the remaining ink of the BCI-11Color / BCI-12Color is little
Blinks 3 times: when the remaining ink of the BCI-11 BK & Color / BCI-12 BK & Color is little
The ink low warning reset function by button operation is added to this printer. The button operation procedures are shown below. (The ink low warning of the BJC-80/80v can be reset from the host computer only.) Operation 1) Turn on the printer. 2) Press the cartridge replacement button to move the carriage to the center. If the carriage was moved to the center by signals from the PC, the reset operation by the cartridge replacement button is not possible. 3) Make sure that the proper cartridge is installed in the carriage. If not, install the proper one. (The ink dot counter reset is effective only to the ink cartridge type installed in the carriage.) 4) Press and hold the RESUME button for the number of beeps corresponding to the warned ink type to select the ink type for which the dot counter is to be reset, and release the RESUME button. The number of beeper sounds is as follows: Once: Twice: 3 times: 4 times: The dot counter of the BCI-10/BCI-11Bk/BCI-12Bk is reset. The dot counter of the BCI-11Color/BCI-12 Color is reset. The dot counter of the BCI-11Bk&Color/BCI-12Bk&Color is reset. The selected ink type is canceled.
5) Press the cartridge replacement button. The ink dot counter selected in the procedure 4) and the ink low warning are reset, and at the same time, the carriage returns to the home position.
11
$4.99 BJC-85 CANON Parts Catalog Parts Catalog only. It's available in PDF format. Useful, if Your equipment is broken and You need t…
|
|
|
> |
|