|
Who's Online
There currently are 5771 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Well done!!! I found what I need to have, indeed!
Furthermore, due to my hobby is repairing vintage equipments, I added this web site in my desk toolbar because I have in mind to search further service manuals. Thanks a lot www.owner-manuals.com !
Regards, Maurizio
;
Again very good service manual, this time very fast download. AAAAA+
;
Ckear manual, well reproduced with plenty of overlap on critical pages.
;
I buy the service manual cheaper here than in elsewhere.Am happy with this site. I recommended the Owner-Manuals.com
;
Great Manual. It was exactly what I was looking for
3.4 Verification
(1) Print the nozzle check pattern when replacing the print head, sheet feeder unit, purge unit, or carriage unit. (2) Check the connection with PC and print the nozzle check pattern when replacing the PCB.
4. Printer Transportation Method
This section describes the procedures for transporting the printer (for example, when returning after repair). (1) Keep the print head in the carriage. (2) Turn off the power and ensure that it is properly capped at home position.
If the print head is left alone by itself, the ink may solidify. Therefore, keep the print head (with ink tank) in the carriage even when transporting. Also, secure the carriage at home position to prevent it from moving and applying stress to the encoder film during transportation.
If the print head must be transported by itself, perform the following: 1. Install ink tanks for each color. (to prevent nozzles from drying) 2. Install the orange protective cap on the print head. (to prevent damage to the print head due to shock etc.)
1 - 15
|
|
|
> |
|