This manual is very useful because it presents the technical specifications of the cd player, including the manufacturer of the reader, this helps if you need to replace it. It also displays the settings and layout of the circuit.
Great quality copy, right what I was looking for, all I need to fix my radio.
Thanks
Text excerpt from page 308 (click to view)
CHAPTER 7 TROUBLESHOOTING
1.3.4.3 Original Speed Adjustment Adjust the speed at which originals are moved for ADF mode as follows: 1) Make a copy of the test sheet in ADF mode on paper of the same size in Direct. (See 1.2.2 of Chapter 7.) 2) Measure the length �L� in the middle of the copy output. (It must be 277 ± 1 mm for A4, 259 ± 1 mm for LTR.)
(feeding direction) L
Copy of the test sheet
F07-103-06 3) 4) 5) 6) 7) 8) 9) Press the Additional Functions key and the # key to start service mode. Press the Left/Right Arrow key so that �#6 SCANNER� is indicated. Press the OK key. Press the Left/Right Arrow key so that �7: CCD� is indicated. Press the OK key. Press the Left/Right Arrow key so that the 2nd row of the LCD indicates �034:�. Enter a appropriate correction value using the Left/Right Arrow key so that the length of L measured in step 2) is as indicated. (An increase by �1� will increase the length of L by about 0.5 mm.) 10) Press the OK key. 11) Press the Stop key (to end SCANNER). 12) Make a copy of the test sheet in ADF mode on paper of the same size in Direct; then, check to make sure that the length of L of the copy is as indicated. 13) End the work if the length of L is as indicated; otherwise, start over with step 2).
