There are currently no product reviews.
A very easy to understand and use manual. Well worth the money.
Very good information with clear drawings. Thanks!
The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
Owner-manuals.com is the best Possibility to give vantage HIGH CLASS Elektronic COMPONENTS
a new Life.Thanks alot for your perfekt Service.
I am proud of you. In the future, I benefited from your services.
A. SCANNER 1. Removing the Scanning Lamp
1) Unplug the copier. 2) Remove the control panel and copyboard glass. 3) Unscrew the two screws and remove the reflector.
1) Remove the control panel and copy. board glass. 2) Grasp the rear of mirror 1 mount move it to the right, and bring it to the part shown in Figure 4-44. Note: Be sure to hold the rear of the mirror mount at the rear when moving it. 3) Unscrew the two mounting screws, then remove the thermal fuse. 1
@ Reflector Figure 4-42 @ Mounting screws @ Mirror @ Thermal fuse Fiugre 4-44 1 mount
4) Push the contact (rear) in the direction of the arrow and remove the scanning lamp.
@ Lamp contact
Figure 4-43 Note: 1. The scanning lamp will be hot, if it has been operating recently. 2. Never touch the surface of the scanning lamp, with bare hands. 3. If the scanning lamp is dirty, wipe it with a dry cloth. If there are any fingerprints or skin oil on it, clean them off with solvent.
1986 CAllow MC.
II JAPAN IIMPAIME
Parts Catalog only. It's available in PDF format. Useful, if Your equipment is broken and You need t…