There are currently no product reviews.
This was super service.Ordered this manual and was reading the download an hour later
as always, rapid and efficient, very good and clear prints
details clearly visible keep going this way!!!!!!
I expect a wonderful result as alaways!!!!!!
Usually is much faster....
Wow very wonderful and clear!!!! I will always trust them
Providing the manual works fine, quickly and without any problems for an acceptable price. After printing the service manual it took me only a short time to repair my carradio from Clarion. Thank You! Greetings from Heiko
B. Scanner Drive Assembly
1. Routing the Mirror Drive Cable 1) Loosen the two fixing screws shown in Figure
4-205. 2) Turn the adjusting screw to move the pulley@ to the right. 3) Move the No. 1 and No. 2 mirror mounts fully to the front. 4) Route the cable with the numbered order provided in Figure 4-205. at number lead the cable at the bottom @, of the pulley. at number g:, wind the cable five times clockwise from bottom to top.
at number @I,,lead cable at the top of the pulley. 5) Adjust the tension of the cable; see â€śAdjusting the Tension of the Mirror cable:â€™ 6) Adjust the position of the mirror; see â€śAdjusting the Position of the Mirror.â€ť
Adjusting the Tension of the Mirror Drive Cable
To adjust the tension of the mirror drive cable, loosen the fixing screw, and turn the adjusting screw to change the position of the pulley 0. Set the No.1 mirror mount on the home position side, and pull a point between 0 and @ with a spring gauge; Figure 4-205. Make adjustments so that the reading of the gauge is 800 to 900 g when the cable is pulled to the front of the machine by 20 mm.
No.2 mirror mount
No.1 mirror mount
COPVRlGNl CANON INC. 0 l@i
CANON NP305013WO 1991 REV.1 OCT. PWED JAPAN AU IN (IMPRUE JAKâ€™N)
Parts Catalog only. It's available in PDF format. Useful, if Your equipment is broken and You need t…