|
Who's Online
There currently are 5780 guests and 1 member online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
;
Easy to order the manual. Good quality and fast delivery.
;
The Service Manual for Sansui AU-9500 was very helpfull, in complete and in good printable condition.
Thanks.
;
Dear Sir,
Document is original service document of sharp. I had a problem with the door contacts. Fuses where blown. With the manual in a few minuts is was clear what the problem was.
Manual was of great help.
With kind regards,
Martie Verhoeven
The Netherlands.
CHAPTER 9 INSTALLATION
Step 11
Work Perform the following while toner is being supplied. 1. Remove the screw used to keep the center of the right cover in place, and install the original tray to the machine (right) with two stepped screws. (You will not be using the removed screw.) 2. Attach the mode memory sheet to the cover of the toner supply mouth. Reference: If you find installing the original tray difficult, loosen the two mounting screws and start over.
Remarks
Stepped screws
Original tray
12
Attach the Manual Feed Instructions label to the manual feed tray of the RDF.
Label
13
When the toner supply operation has ended, place the Test Sheet on the copyboard, make copies, and check the copy images. At times, toner can fall from the drum separation claws, soiling the initial ten or so copies. (This phenomenon will disappear as copies are made.) Check to make sure that pick-up from each source is normal. Make two-sided/overlay copies.
� Check to make sure that no abnormal sound is heard. � Check images of copies made at each default ratio. � Check to make sure that as many copies as set are made. � If there is a difference in density between left and right, adjust the height of the rear of the primary charging wire to correct.
14
� Check to make sure that copying operation is normal. � Check to make sure that abnormal noise is not heard. � Check to make sure that paper feeding in the holding tray assembly is normal.
COPYRIGHT © 1997 CANON INC.
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
9-29
$4.99 NP6250 CANON Parts Catalog Parts Catalog only. It's available in PDF format. Useful, if Your equipment is broken and You need t…
|
|
|
> |
|