There are currently no product reviews.
Complete MFG Service Manual at a good price FAST !
Downloaded the manual, reasonably straightforward, pretty much exactly as advertised.
circuit diagram and sparepart list available
Very good reproduction (copy) of original manual. Didn't have a parts list, but schematic was completely labeled with parts. Complete instructions on how to adjust mechanical functions of the 8-track deck. Well worth having and at a very reasonable cost.
It's a full manual. All the parts are in there. I haven't found the problem yett, but I am working on it; hope I can rebuild the part myself. To make it more secure and unbreakable this time. Because the part has failed several times before and costs a lot to let it be repaired.
Thanks so much for this rich illustrated and parted manual.
CHAPTER 2 STANDARDS AND ADJUSTMENTS
Adjusting the Mirror Position (optical length between No. 1 mirror and No. 2 mirror) If you have replaced the scanner drive cable, you must adjust the mirror position, by changing the position of the cable retainer of the No. 1 mirror mount. Reference: 1. As more and more copies are made, the cable tends to become slack, requiring adjustment. 2. If the optical length between the No. 1 mirror and the No. 2 mirror is not correct, the horizontal reproduction ratio will be wrong, causing poor sharpness or blurred images.
1) Fit the mirror positioning tool (FY9-3009) as shown.
Figure 2-3 2) Remove the copyboard glass. 3) Loosen the screws used to secure the cable retainer at the rear and the front of the No. 1 mirror mount .
Parts Catalog only. It's available in PDF format. Useful, if Your equipment is broken and You need t…